Starmount® - USB Hubs, USB to Parallel Printer & USB to Serial Adapter

Starmount ^{^{^{^®}}} Limited
Specialists in PC's, components and Consultancy

This page is now obsolete. Please visit our new site for
USB cables, accessories, cases and other products

USB Hubs, USB to Parallel Printer & USB to Serial Adapter

USB 4 port Hub
Illustration only
Our USB products USB Hub 4 Port, Mini
USB Hub has four downstream ports and one upstream port. It is supplied in a plastic case and is compatible with both the PC and iMac^TM.
The hub can be switched between bus powered mode and self-powered mode (suitable power adapter required). Includes a 1.8m USB A to B cable.

Key Features :-

USB Hub with 4 downtream ports
Reliable with 5m transmission distance
Supports full & low speed devices
Plug & Play with USB devices
Overcurrent detection, protection & recovery

Windows 95 OSR2, Windows 98 and iMac compatible.

Compliant USB Specification 1.1

USB to Parallel Printer Cable Our USB products USB to Parallel Printer Cable
The USB to Parallel Printer cable allows a "legacy" printer with a centronics (parallel) interface to be connected directly to a USB port. Supplied with drivers for Windows 95, Windows 98 and installation instructions. The product is blister packaged.

The cable has a male centronics parallel connector at one end and a USB series A plug at the other. (Latest update of install disk: 14-Apr-99, available from our usb support pages.)

USB to Serial Port Adapter (DB9M) - Awaiting picture Dimensions 66x34x16mm
Our USB products USB to Serial Port Adapter
The USB to Serial Port adapter is bus powered and is supplied with a standard DB-9 male connector which allows standard 9-pin serial peripherals to plug into. Includes an attached 1.8m cable with a USB series A plug to enable connection to the host computer.

Key Features:

Works with mobile phones, PDA's, digital cameras, modems and ISDN TA's.
Supports RS232 serial interface
Over 500 Kbps data transfer rate
Supports automatic handshake mode
Supports remote wakeup and power management
Complies with USB Rev 1.1
System requirements: Windows 98, ME, 2000 or XP.
Based on Prolific PL2303 chipset.

Illustration only Our USB products	USB Hub 4 Port, Mini USB Hub has four downstream ports and one upstream port. It is supplied in a plastic case and is compatible with both the PC and iMac^TM. The hub can be switched between bus powered mode and self-powered mode (suitable power adapter required). Includes a 1.8m USB A to B cable. Key Features :- USB Hub with 4 downtream ports Reliable with 5m transmission distance Supports full & low speed devices Plug & Play with USB devices Overcurrent detection, protection & recovery Windows 95 OSR2, Windows 98 and iMac compatible. Compliant USB Specification 1.1
Our USB products	USB to Parallel Printer Cable The USB to Parallel Printer cable allows a "legacy" printer with a centronics (parallel) interface to be connected directly to a USB port. Supplied with drivers for Windows 95, Windows 98 and installation instructions. The product is blister packaged. The cable has a male centronics parallel connector at one end and a USB series A plug at the other. (Latest update of install disk: 14-Apr-99, available from our usb support pages.)
Dimensions 66x34x16mm Our USB products	USB to Serial Port Adapter The USB to Serial Port adapter is bus powered and is supplied with a standard DB-9 male connector which allows standard 9-pin serial peripherals to plug into. Includes an attached 1.8m cable with a USB series A plug to enable connection to the host computer. Key Features: Works with mobile phones, PDA's, digital cameras, modems and ISDN TA's. Supports RS232 serial interface Over 500 Kbps data transfer rate Supports automatic handshake mode Supports remote wakeup and power management Complies with USB Rev 1.1 System requirements: Windows 98, ME, 2000 or XP. Based on Prolific PL2303 chipset.