USB Internal Hubs

Starmount ^{^{^{^®}}} Limited
Specialists in PC's, components and Consultancy

This page is now obsolete. Please visit our new site for
USB cables, accessories, cases and other products

USB Internal Hubs

USB Internal 4 port Hub
Illustration only
Our USB products USB Internal Hub 4 Port - fits in spare PC riser slot
This 4-port Universal Serial Bus (USB) hub fits into a spare riser slot on the rear of your PC or workstation. It has one upstream and four downstream ports and supports both full speed (12 Mbps) and low speed (1.5 Mbps) devices. The USB hub is self powered and provides per-port overcurrent detection and protection. Each port is supplied 5V and a maximum output current of 500 mA.

The product is retail boxed and supplied with : USB hub card, USB cable, internal power cable, and instructions. Note: This hub requires that the host system already has available at least one working USB port.

Key Features :-

USB Hub with one upstream and 4 downtream ports
Overcurrent detection, protection & recovery

Supports full & low speed devices
Supports up to 127 devices
Plug & Play with USB devices
Windows 95 OSR2, Windows 98, XP.

USB Internal 4 port Hub - fits in 3.5in floppy bay
Illustration only
Our USB products USB Internal Hub 4 Port - fits in 3.5in bay
This 4-port Universal Serial Bus (USB) hub fits into a spare 3.5" (floppy drive) bay on the front of your PC or workstation. This provides four USB ports with easy access at the front of your PC. The remaining specifications are exactly the same as the above internal USB hub.

The product is retail boxed and supplied with : USB hub, USB cable, internal power cable, bracket and instructions. Note: This hub requires that the host system already has available at least one working USB port.

Key Features :-

(as above)

Illustration only Our USB products	USB Internal Hub 4 Port - fits in spare PC riser slot This 4-port Universal Serial Bus (USB) hub fits into a spare riser slot on the rear of your PC or workstation. It has one upstream and four downstream ports and supports both full speed (12 Mbps) and low speed (1.5 Mbps) devices. The USB hub is self powered and provides per-port overcurrent detection and protection. Each port is supplied 5V and a maximum output current of 500 mA. The product is retail boxed and supplied with : USB hub card, USB cable, internal power cable, and instructions. Note: This hub requires that the host system already has available at least one working USB port. Key Features :- USB Hub with one upstream and 4 downtream ports Overcurrent detection, protection & recovery Supports full & low speed devices Supports up to 127 devices Plug & Play with USB devices Windows 95 OSR2, Windows 98, XP.


Illustration only Our USB products	USB Internal Hub 4 Port - fits in 3.5in bay This 4-port Universal Serial Bus (USB) hub fits into a spare 3.5" (floppy drive) bay on the front of your PC or workstation. This provides four USB ports with easy access at the front of your PC. The remaining specifications are exactly the same as the above internal USB hub. The product is retail boxed and supplied with : USB hub, USB cable, internal power cable, bracket and instructions. Note: This hub requires that the host system already has available at least one working USB port. Key Features :- (as above)